LAUNCH X431 IMMO PLUS, provides extraordinary services for gearbox, and engine system. Together with high-end hardware & software, LAUNCH X431 scanner also works as a comprehensive diagnostic tool integrating OE-level all-system diagnostics, 39+ reset functions, advanced ECU coding functions, personalization, active tests, etc., which can be the perfect repair partner for large-scale repair shops, and mechanics.

LAUNCH X431 IMMO PLUS professional tool comes with abundant related solutions that cater to skilled mechanics: Read data (All Key Lost); Learning; Matching; ECU Reset/Coding; Adding/Deleting/Disabling; Generation; Remote Learning; Reading/Writing MCU, Engine; etc.

Besides powerful functions, LAUNCH X431 IMMO PLUS is also a comprehensive car scan tool with 5x faster diagnostic efficiency for global 10000+ models.

1. ECU Coding: Perfectly match/learn the new ECU modules with vehicles after replacement.
2. 39+ Reset Functions: Combine common reset functions to solve 99% of repair problems.
3. Reflash Hidden Functions: Allow users to personalize the vehicle functions & settings as their like.
4. All-System Diagnostics: Accurately scan all the available systems and quickly clear all faults.
5. Bi-directional Control: Minutes to pinpoint the possible problems via active tests.
6. CAN FD & DoIP Protocols: Overall improve diagnostic data transmission rate of GM, Volvo, Land Rover, Jaguar, etc.
7. 99% of Vehicle Coverage: Cover 10000+ vehicle modes such as BMW, Benz, Au~di, VW, Buick, Toyota, Volvo, Chrysler, etc.
8. FCA SGW Vehicle Access: Secure visit & diagnose Fiat, Chrysler, Dodge, Alfa Romeo (2017 and later).
9. Advanced Hardware: Android 10.0 OS, 2.0GHz 4-Core CPU, 4GB RAM+64GB ROM, and 6300mAh battery.
10. Remote Diagnostics: Get remote repair assistance from technicians to solve tricky issues effectively .

Why Should You Choose This LAUNCH X431 IMMO PLUS?

LAUNCH X431 IMMO PLUS is a great -related problem solver. Upgrade of Launch X431 IMMO Elite car scanner, the new generation Launch X431 IMMO PLUS makes great improvements in its functions, hardware configuration, and vehicle coverage to match your increasing diagnostic needs such as adding/deleting keys, enhancing vehicle security, matching the new remote, etc.

Comprehensive Functions:

Read DATA/CS (All Lost): LAUNCH X431 IMMO PLUS can read the data from chips and allows the technician to perform necessary identification and checks. Compatible with Ford, GM, Chrysler, Dodge, Jeep, VW, Benz, BMW, Porsche, etc.
Module Replacement: Replace the new module and relearn it with the vehicle. Compatible with BMW, Mercedes-Benz, VW/Au-di, Honda, Ni~ssan, Hyundai, Kia, etc
Matching/Learning: Read data to ECU module and reset/match the new one with ECU. Compatible with Ford, GM, Mercedes-Benz, BMW, VW/Au-di, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Ni~ssan, Hyundai, Kia, etc.
Key Generation: Create or generate cryptographic keys used for securing and authenticating various functions within a vehicle's electronic systems.
Remote Learning: Match remote data with vehicle anti-theft system.
Module Data Wiping: Clear module information & data for matching new ones.
ECU Reset: Reset the ECU with vehicle after replacement or repair.
More...

Designed for LAUNCH IMMO PLUS, X-PROG 3 enables reading/writing on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared key, generating new ones, reading BMW engine INS code, identifying type, reading data, replacing Engine & Gearbox ECU, etc.

Reading/Writing Various Chips

Read/Write MCU, Engine

Engine/Gearbox ECU Module Replacement:
LAUNCH X431 IMMO PLUS combines with PROG 3 to back-up the original data from the original engine & gearbox modules and directly write into the new module without troublesome steps. Widely applied to 5000+ types of vehicle gearbox & engine models and common brands such as Bosch, Continental, Siemens, Delco, Getrag, ZF, Temic, etc.

More Advantageous Functions for Specific Models:

For VW/Audi: VW & Audi Learning/All Lost; 5th-Gen. Audi (0AW/0B5) Gearbox ECU Replacement; 5th-Gen. VW UDS Engine ECU Reading, Writing; 5th-Gen. VW/Audi Bosch and Siemens Engine ECU Replacement; 4th-Gen. VW/Audi Engine ECU Replacement; etc.

For Benz: Mercedes-Benz Adding/All Lost; Mercedes-Benz ECU Data Wiping; Mercedes-Benz Infrared ones Reading/Writing; etc.

For BMW: BMW Adding/All Lost; BMW CAS4/CAS4+ ECU Replacement; BMW E chassis 8HP Gearbox ECU Data Wiping; BMW Engine INS Code Reading; etc.

For Porsche: Porsche Adding/All Lost; ECU Replacement

4th-Gen. Instrument + Engine Module: Learning/All Lost/Instrument Replacement/Engine Replacement; 4th-Gen. Comfortable Module + Engine Module: Learning/ All Lost/ Engine Replacement; 4th-Gen. EZS/Kessy + Engine Module: Learning/All Lost; Engine Replacement; 5th -Gen System (A4/A5/Q5/A6/A7/A8): Learning/ All Lost/ Engine & Gearbox Replacement.

39+ Services to Address All Your Needs

Tackling challenging repair tasks is easier with the Launch X431 IMMO Plus. It comes equipped with 39+ services, including ECU reset, clutch matching, rain light sensor calibration, and turbo matching, providing quick solutions for a variety of automotive problems.

LAUNCH IMMO PLUS diagnostic scanner combines 39+ maintenance functions to meet various diagnostic needs such as module matching, relearning, calibration, adaptation, resetting, etc., and provides more help to enhance repair efficiency. LAUNCH X431 IMMO PLUS car scanner for all vehicles adds 6 new functions: Clutch Matching, FRM Matching, Turbocharging Matching, Gateway Module Data Calibration, ECU Reset, Rainfall Light Sensor, etc.

Oil Reset: Reset the oil life system and turn off the oil light after replacing the oil or oil filter to start a new cycle.
EPB Reset: Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.
SAS Reset: Calibrate the steering angle after replacing the steering angle position sensor and the mechanical parts of the steering system, etc.
Suspension: Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the suspension system.
ABS Bleeding: Bleed the of a brake system to restore ABS brake sensitivity.
Battery Matching: Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information, and prevent the related control module from detecting false information.
TPMS Reset: Quickly look up the tire sensor IDs from the vehicle’s ECU, and perform TPMS replacement and sensor test.
Injector Coding: Code the inje~ctor after replacing or adjusting to correct the injection volume of each cylinder more accurately.
More Functions Include: Brake Reset, Throttle Matching, TPMS Reset, AC System Relearn, Headlamp, AdBlue Reset, A/F Reset, Level Calibration, Coolant Bleeding, Crank Position Sensor Adaptive Learning, Engine Power Balance, GPF Regeneration, Gearbox Relearn, HV Battery Diagnostics, Intelligent Cruise Control System, Language Change, Motor Angle Calibration, Nox Sensor Reset, Seat Occupancy Calibration, Stop/Start Reset, Sunroof Reset, Tire Reset, Transport Mode, Windows Calibration, etc.

Note: Specific functions vary by vehicle models, makes, and years. Any vehicle compatibility of LAUNCH X431 IMMO PLUS, you can send message to us.

Advanced ECU Coding

The Launch X431 IMMO Plus goes beyond basic scan tools by offering advanced ECU coding. This feature allows technicians to perform high-level repairs and customize car functions, such as component matching, activating daytime running lights, disabling warning buzzers, and adjusting interior lighting.

LAUNCH X431 IMMO PLUS diagnostic scanner features advanced ECU coding functions that help you match the newly replaced ECU with vehicles but also allow you to reflash the hidden functions to optimize the vehicle driving experience on the roads. What’s more! LAUNCH X431 IMMO PLUS provides module installation, online calibration, online account login service, etc.

Component Matching: After replacing a new ECU module or an actuator, you can use the LAUNCH X431 IMMO PLUS Key Fob Programming Tool to match component control modules to make them work properly with the vehicle.

Flash The Hidden Functions: LAUNCH automotive scanner is able to activate the hidden functions or deactivate the unneeded functions to meet users’ needs and increase income for repair shops. Examples as auto start-stop, tilt mirror reversing, foldable mirrors, interior lights customizing, buzz warning sound, daytime running lights, and changing brightness of daytime running lights.

Online ECU Coding: Compatible with BMW, VW, Audi, Skoda, Seat, Porsche, etc. This online coding allows you to access the online data from the OEM server to do module relearn/matching/coding for high-level vehicles.

Online Calibration: Connect to the online server to perform a special adjusting function. Compatible with VW, Audi, Skoda, Seat, etc.

Note: ECU coding functions vary by vehicle models, makes, and years. Any vehicle compatibility of LAUNCH X431 IMMO PLUS, you can send a message to us.

OE-Level Diagnostics and Bidirectional Control

With OE-level diagnostic capabilities, the Launch X431 IMMO Plus conducts thorough scans and clears DTCs for all available systems. Its bidirectional control allows it to send commands to ECUs, enabling technicians to quickly identify issues with windows, doors, wipers, lights, solenoid valves, and more, saving valuable time and reducing costs.

150+ Brands Supported + DoIP & CAN FD

The Launch X431 IMMO Plus is compatible with over 150 brands and 99% of OBD-compliant vehicles (1996-2026). It supports FCA SGW vehicles, such as Fiat, Land Rover, and Chrysler. Additionally, the new CAN FD and DoIP protocols enable faster data transmission for GM, Volvo, Land Rover, and Jaguar, improving diagnostic efficiency. The tool also supports 25+ languages, making it easier to interpret vehicle information and diagnostic results.

All-System Diagnostics Scan Every System & Catch Every Fault Code
LAUNCH X431 IMMO PLUS features full-model all-system diagnostics that enable technicians to root out the hidden problems underneath the hood easily. With the LAUNCH IMMO PLUS Key Fob Programming Tool in your hands, a comprehensive check can reach more vehicle systems such as Engine, Chassis, TPMS, ABS, Steering Angle System, Airbags, Suspension, BCM, Rain Sensor, etc.

View ECU Information: Include unit type, version numbers, and more specifications.
Read Fault Codes: Read stored codes of the tested vehicle to locate vehicle problems.
Clear Codes: Interpret code definition and help repair problems to turn off the MIL.
View Live Data Stream: View live data to learn vehicle status and facilitate finding out problems.
Active Test for narrowing diagnostic range and quickly pinpointing vehicle problems.
Bi-directional Control Pinpoints Vehicle Wrong Parts with Only 5 Minutes

LAUNCH X431 IMMO Plus, also known as a bi-directional control, is a specialized diagnostic tool used by mechanics and automotive technicians to locate problems within minutes. Unlike code readers, this LAUNCH automotive scanner can not only read but also send commands and receive data from various systems and components of the vehicle.

For example, you can command the injectors to pulse individually, engage specific solenoids, operate relays, open and close valves, switch cylinder correction off/on, modulate throttle, operate compression test, or activate the cooling fan. This allows you to test the functionality of these components, identify faulty ones, and diagnose issues related to their operation.
In a word, all-around system diagnostics & accurate bidirectional control not only save more money for home repair but also improve 200% efficiency for large-scale repair shops.