[Ship From US] Autel MaxiCOM MK808 2023 Newest OBD2 Car Diagnostic Scanner Equipped with 25+ Maintenance Functions All System Diagnosis

• The most affordable combination of ALL systems diagnostics and 25 (still growing) service functions in one Android-based 7” touchscreen tablet tool.
• A full detection for ALL systems (ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.).
• 25 (still growing) commonly used hot services covered for complete diagnosis and reset functions in routine maintenance.
• Supports 10 Modes of OBDII operations in 4 display modes (Analog Gauge, Text, Waveform Graph, Digital Gauge).
• Extensive coverage of over 55 car brands worldwide.
• One-Touch AutoVIN & AutoScan for smart diagnostics.
• One-Click Software Update via Wi-Fi.
• Multiple Language Support (13): English, Traditional Chinese, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian.
• Abundant other useful feature

• If you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
• If the Emission system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
• If the vehicle won’t start or the “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;
• If your car is slipping or difficult to shift. The Transmission system plays an important part in the overall performance of your car;
• To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;
• To diagnose Light System if you see rapid signal blinking or dimming lights.

• Oil reset service allows you to perform reset for a new calculation of the Engine Oil Life system once changed the oil.
• EPB service is important in the maintenance of the electronic braking system’s safety and efficiency.
• SAS reset to clear memories of the previous steering angle sensor and store the replaced one;
• DPF service supports forced fuel injector regeneration;
• BMS service to reset battery management system;
• ABS Bleeding ABS brake bleeding to get a firm brake pad after air exhaustion;
• Injector Coding to write the new code to the ECU after replacement of injector;
• IMMO (Anti-theft matching) by disabling the lost car key and programming the new car key, can effectively protect your car from being stolen.
• Throttle Matching, TPMS Reset, SAS Calibration, Suspension Calibration, Trans Adaption, Airbag Reset, ABS & SRS, WIN DR Roof, Seats, Lang Change, Headlamp, CHG Tire Size, TEC Learn, Cylinder, Odometer, Turbocharging, Clutch, A/F Setting.

*Note: Varies by vehicle’s make, model, and year.

Welcome to send us the VIN data for the compatibility check.

• Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
• Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes, and resets monitors.
• Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically, and stores freeze frame data.
• I/M Readiness Status: This shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
• Read Live Data Stream: Show the information of continuous data stream from a vehicle in a live graphic (waveform) display.
• View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the onboard computer at the time the emission-related fault occurs.
• O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s onboard computer.
• On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
• Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
• Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.